Start from the problem you want to solve
Every plant has a different first priority. Pick yours, and we will show you which TnG products solve it, on your own machines.
Explained in detail
How each solution works, what it records, and which TnG products deliver it.
Automatic CNC Offset Correction
Gauge result to CNC wear offset, automatically. Control limits, correction clamp, offset frequency and full traceability for every part.
Read the guideOEE Monitoring Software for CNC and Production Machines
Live OEE for every machine and shift, from machine data. Availability, performance and quality losses with reasons, trends and reports.
Read the guideReal-Time CNC Machine Monitoring and Data Collection
Automatic data collection from CNC machines of any make. Live status, counts, cycle time and alarms on one screen, with history for every shift.
Read the guideOnline SPC and Quality Monitoring for Manufacturing
Live SPC from connected gauges. Trends, Cp/Cpk, attribute GO/NO-GO, PPM, rejection alerts and red-bin interlocking, per machine and part.
Read the guideCNC Tool Life Management
Tool life counted from actual production. Target versus actual life per part and machine, insert edge history, near-life alerts and tool stock control.
Read the guideIndustry 4.0 Retrofit for Legacy CNC and Conventional Machines
IoT retrofit for older CNCs, conventional machines, presses and SPMs. Monitoring, OEE, gauging and interlocks without replacing machines.
Read the guideAndon and Breakdown Alert System for the Shop Floor
Automatic breakdown detection with reasons, department-wise mobile alerts and acknowledgement, Andon TV display and downtime Pareto.
Read the guideImprove OEE
OEE is calculated days later in Excel from partial data, so nobody can act on it during the shift.
- Running, idle, alarm and offline time captured from the CNC
- Performance against approved cycle time, per part
- Quality rate fed by real rejection data
- Current-shift OEE on desktop, web, Andon TV and mobile
Reduce breakdown time
Stops are noticed late, the reason is never written down, and the maintenance team hears about it last.
- Stops beyond the agreed limit open a breakdown record automatically
- Operator category and technician detail on the same event
- Alerts routed to the responsible department, with acknowledgement
- Reason Pareto and machine-wise downtime show the biggest losses
Catch quality problems in-process
Rejections are found at final inspection, after the machine has made many more parts the same way.
- Smart digital gauges at the machine, with every reading recorded
- Automatic wear compensation to FANUC, Siemens, Mazak and other CNCs
- Online SPC, Cp/Cpk and mobile rejection alerts
- Existing gauges of any make made smart with Offset Master
Paperless reports and audits
Log sheets, registers and spreadsheets take hours to compile and cannot prove who changed what.
- OEE, production, quality, breakdown, operator and tooling reports
- Scheduled Excel/PDF reports by email
- Calibration certificates, history cards and audit trail
- Data that supports IATF 16949 and ISO 9001 audits
Enforce shop-floor rules on the machine
Untrained operators run critical machines, rejected parts reach the good bin, and power cuts leave half-machined parts unchecked.
- Biometric operator access on CNC machines
- Red-bin interlocking after every rejection
- Power-cut interlinking with part flagging
- Inspection interlocks and customised CNC programming
Machining and every division of manufacturing
CNC machining and job shops
Turning, VMC, HMC and grinding lines of any machine make, from short runs to high volume.
Auto-component manufacturers
High-volume parts where cycle time, OEE, PPM and traceability are reviewed by customers.
Gear and transmission plants
Hobbing, shaving, grinding and induction hardening lines with critical dimensions.
Forging and press shops
Forging presses, power presses and conventional machines monitored alongside CNCs.
Special-purpose and assembly lines
SPMs, PLC-controlled machines and inspection stations with interlocks and operator control.
IATF 16949 / ISO 9001 plants
Calibration control, traceability and records that stand up to customer and certification audits.
See it working on your own machines
Share your machine list and controller details. We will review compatibility and propose a pilot scope for your plant.
